E-23
Playing a Built-in Tune
627U-E-025A
To pause a tune play
1
While a tune is playing, press the PLAY/PAUSE
button to pause it.
2
To resume play, press PLAY/PAUSE again.
To fast reverse during playback
1
While playback is in progress, hold down the REW
button.
•Beeps sound during fast reverse to give you an idea
of where you are located in the tune.
1 beep: indicates a change to anther measure.
2 beeps: indicates the beginning of the tune.
2
To resume normal playback, release the REW
button.
To fast forward during playback
1
While playback is in progress, hold down the FF
button.
•Beeps sound during fast forward to give you an idea
of where you are located in the tune.
1 beep: indicates a change to anther measure.
3 beeps: indicates the ending of the tune.
2
To resume normal playback, release the FF button.
NOTE
•Each time you select a new tune, the tone, tempo, and
rhythm that is programmed for the tune are automatically
selected. You can change a tune’s tone and tempo during
playback, but you cannot change the rhythm.
•You can also adjust the accompaniment volume
(page E-21) for tunes 00 through 80.
Song Mode Display
In the Song Mode, the display shows a variety of information
about the tune being played.
[Playback Display]
NOTE
•Chord names are not displayed for Songs 81 through
99.
Adjusting the Tempo of a Tune
To change the tempo of a tune
The tempo can be set within a range of 20 to 255 beats per
minute. The tempo setting can be adjusted while the tune is
stopped, playing back, or paused.
1
Use the TEMPO buttons [왖/왔] to adjust the tempo.
왖 : each press increases the value
왔 : each press decreases the value
The indicator “ II ” appears while a
tune play is paused.
The indicator “왗왗” appears while a
fast reverse operation is in progress.
The indicator “왘왘” appears while a
fast forward operation is in progress.