Assigning a Text Tag to a Bank | Radio Shack PRO-92 specification

2.Press PGM. M changes to P.

3.Press TEXT. The cursor appears at the 3rd line.

4.Enter the text using the numeral keys (see “Text Input Chart” on Page 33).

Note: If you make a mistake, press or to move to the character you want to change.

For example input “HAM 6m” as follows:

•“H” is the second letter associated with 4 on the keypad. Press 4 then 2.

•“A” is the first letter associated with 2 on the key- pad. Press 2 then 1.

•“M” is the first letter associated with 6 on the key- pad. Press 6 then 1.

•“Space.” Press •.

•“6” is the sixth number associated with 1 on the keypad. Press 1 then 6.

•“m” is the first letter associated with 6 on the key- pad. Press 6 and FUNC (for the lower case set), then press 1.

5.Press ENTER to input the text.

Assigning a Text Tag to a Bank

1.Press PGM.

2.Select a channel within the desired bank by press- ing MANUAL and entering the bank number (000 for bank 0 or 200 for bank 2, for example). Press MAN- UAL again, then press PGM.

3.Press FUNC then 6. The cursor appears at the 3rd line of the display. Enter the text using the keypad and press ENTER.

32Operation

Image 32

Radio Shack PRO-92 owner manual Assigning a Text Tag to a Bank

Contents

PRO-92 Handheld Scanner Contents Special Features Operation Troubleshooting Care SpecificationsTrunking Operation General Guide to Scanning Features Scanner scans Features FCC Notice Scanning Legally Power Sources Preparation Using Batteries Preparation11 Charging Rechargeable Batteries Replace the cover Using AC Power Using Vehicle Power PWR DC 9V jack Connecting the Antenna Connecting an Optional Antenna Connecting AN EARPHONE/ Headphones Listening Safely Traffic Safety Connecting AN Extension SpeakerUsing the Belt Clip Connecting the Clone Cable About Your Scanner Look AT the Keypad About Your Scanner Look AT the Display Channel Storage Banks 7 are turned off Search ModeUnderstanding Banks Understanding CTCSS/DCS Search BanksPL Codes DPL Codes Understanding Your SCANNER’S Modes Open and Closed Modes AM Mode FM Mode LTR E. F. Johnson Mode Motorola Mode Edacs Mode Turning on the Scanner and Setting Squelch Operation Storing Known Frequencies Into Channels Bank Channel Manual Storing Text Tags Assigning a Text Tag to a Channel Assigning a Text Tag to a Bank Text Input Chart Press To Enter a Character from this Group Finding and Storing Active Frequencies Searching a Preprogrammed Frequency RangePress Func 9 w x y z Current Search Bank Func then Tune Storing a Frequency While Searching for a Specified ChannelChanging a Search Range with a Preprogrammed Range Scanning the Channels Manually Changing a Search Range Manually Tuning a Frequency Turning Channel-Storage Banks Off and On Deleting Frequencies from Channels Listening to the Weather BandListening to a Weather Channel Displaying Weather Messages Special Features Using the Delay Function Locking OUT Channels or Frequencies Locking Out ChannelsReviewing the Lock-Out Channels Locking Out Frequencies Reviewing Locked-Out Frequencies Clearing a Locked-Out FrequencyClearing All Lock Out Frequencies in a Search Bank Locked-out Priority Special Features Display Description Changing the Receive ModeChanging the Frequency Step Using the Attenuator Range MHz Search Step kHz Using the Display Backlight Using the KeylockTurning the KEY Tone on and OFF Changing the Display Contrast Trunking Operation Cloning the Programmed Data from Scanner to Scanner Understanding Trunking Setting Squelch for the Trunking Mode Programming Trunking Frequencies Programming Motorola Trunking Systems UHF-Lo Offset Frequency Programming Fleet Maps Size Code Talk Group IDS Storing Talk Group IDs Talk Group ID Hold Locking Out Talk Group IDs Reviewing Locked-Out Talk Group IDsClearing Talk Group IDs Clearing All Talk Group IDs in One Bank Closed Mode Open and Closed Modes General Guide to Scanning Changing the Open/Closed ModeMode Open Closed Guide to Frequencies US Weather FrequenciesHam Radio Frequencies Birdie Frequencies General Guide to Scanning Guide to the Action Bands Typical Band UsagePrimary Usage VHF Band Abbreviations Services Band Allocation Meter Amateur Band VHF Low Band- 29-50 MHz in 5 kHz stepsMeter Amateur Band- 50-54 MHz Aircraft Band- 108-137 MHz Low Band 450-470 MHz Government Band 406-420 MHzCm Amateur Band 420-450 MHz Frequency Conversion Squelch is not TroubleshootingProblem Possible Cause Remedy DC 9V jack RESETTING/INITIALIZING the ScannerResetting the Scanner Initializing the Scanner ResetCare Specifications UHF T 9V DC Specifications71 Limited One-Year Warranty