TROUBLESHOOTI NG

Situation:

Probable Cause:

Solutions:

 

 

 

 

 

Make sure wire is

No sound from speakers.

Speaker wire not connected.

properly connected at both

the speaker and the amplifier

 

 

 

 

observing proper polarity.

 

 

 

 

Speaker selector on

Activate proper speaker

 

amplifier is not on.

selector on amplifier.

 

 

 

No sound from one speaker.

Balance control on receiver

Place balance control in

or preamp is not centered.

the center.

 

 

 

 

 

Speaker wire not

Check all connections at

 

completely connected.

amplifier and speakers.

 

 

 

Only the woofer or midrange/

 

Make certain gold bi-amp

Bi-amp clips are not intact.

clips are in place and

tweeter are playing.

 

tightened down.

 

 

 

 

 

Very little bass and/or

Speakers are wired out

Check entire system for

proper polarity and make

imaging.

of phase.

adjustments as necessary.

 

 

 

 

 

 

Woofers are cancelling

Experiment with room and

 

determine if woofers need

 

each other on 1044-SE or

 

to point toward or away

 

1266-SE models.

 

from each other.

 

 

WARNING: Be sure to REMOVE bi-amp clips COMPLETELY when bi-amping or bi-wiring.

C A R E & C L E A N I N G

o maintain speaker appearance, we recommend an occasional application of furniture grade polish to the wood surface of the cabinet. To clean dust

from the grille cloth, use a vacuum with a brush attachment.

6