SETUP SUGGESTIONS CONTINUED
URROUND* speakers may be placed either behind or to the sides of the listening position. The listening position should be at the center of both surround speakers. For best performance you may want to experiment
with angling the surround speakers either towards or away from the listening po- sition. All RBH Signature Series and Signature Inwall loudspeakers are sonically matched with the T Series for seamless integration in a home theater setting.
In a T-2 configuration, the SUBWOOFER (1010-SEN) generally sits below the T-1, connected by the clamping bracket (page 6). As mentioned proviously,in a T-3 configuration, the second set of subwoofers can be mounted either above the T-1, connected by a second set of clamping brackets, or placed elsewhere in the room. Connection of the subwoofer is done by speaker wire, not by audio interconnect.
When configured as a T-2P or T-3P, an RBH SA-400 is used to power the subwoofer. The SA-400 is a monoblock subwoofer amplifier. This amplifier is designed to power 1 1010-SEN at a time, which is why 2 SA-400 amplifiers complete a T-2P system and 4 SA-400 amplifiers complete a T-3P system. For proper instructions on the setup and operation of the SA-400 subwoofer amplifier, please refer to the owners manual included with the SA-400.
WARNING: Be sure to REMOVE bi-amp clips COMPLETELY when bi-amping or bi-wiring.
*There are several
different surround formats available. Dolby Pro-Logic, Pro-Logic II, Dolby Digital
and DTS generally have a 5 speaker plus subwoofer requirement. Dolby Digital
EX and DTS ES add a center rear speaker. Pl
ease consult your audio/video professional
to determine which system is best for you and how many speakers you will
require.