ANT3036W / ANT3036X
Outdoor Antenna
User’s Guide
Step 1: Unpack
Remove all three sections of the antenna and the hardware bag from
package. Make sure the following parts are in the package:
• 3antennasections
• Hardwarebag
U-Bolt Transformer
Mast Clamp Insert (4) Plugs
(4)10/32”Hexnuts (2)1/4”HexNuts
Matching (8)7/16”Washers
• 58”mast(ANT3036Wonly)
Middle
section
Step 2: Unfold the middle section
Find the middle section of the antenna
(illustrated on the left).
Starting from the rear of the middle section,
unfoldthelongVHFElementsuntiltheylock
into place (as illustrated below).
Turn the middle section over and unfold the
shorter elements on the other side.
Rear
BEFORE YOU START!!!
PleasereadtheIMPORTANTSAFETYINFORMATIONsheet
included in this package.
Back
Middle Front