TUNER CONTROLS AND OPERATIONS
CHOOSING A RADIO STATION
1.Choose the Tuner function. The system will default to the last station the tuner was set to before power was removed.
2.Use the BAND button to choose AM, FM 1 or 2.
3.Use the TUNING UP (+) or DOWN
•Pressing the +/- button once will move the tuner incrementally.
•Pressing and holding the +/- button will cause the tuner to automatically search for the next frequency broadcasting clearly. “AUTO” will appear in the display.
4.Press the FM MODE button to switch between FM Stereo and FM Mono for better reception of FM stations. Be aware, however, that you can only receive FM stations in stereo if they are being broadcast in stereo.
PROGRAMMING PRESETS
Your system is capable of holding up to 24 preset radio stations in memory (8 from FM1, 8 from FM 2 and 8 from AM) for as long as the unit is plugged in, and up to two weeks after AC power has been removed.
1.Choose the radio station and band you wish to store.
2.Press the MEMORY button to activate the Preset mode.
3.Select a preset number by using the PRESET UP (
) or DOWN (
) buttons to select the preset channel you want to hear.
4.Press MEMORY again to lock in your choice.
After you have finished programming your selections into the system’s memory, you need only use the PRESET UP or DOWN buttons on the unit to search for the desired frequency. On the remote, use the number pad to select the number of the preset channel you want to hear.
10
