OWNER’S MANUAL
SERVICING POLE TRIMMER
(Continued)
5.Remove screw that holds down cutter blade assembly (see Figure 19).
| Screw |
Cam | Cutter Blade |
| Assembly |
Figure 19 - Removing Cutter Blade Assembly
6.Lift and twist the cutter blade assembly to disengage from cam, being careful not to rotate cam. Note: The cam is not secured by any fasteners. If cam lifts off with cutter blade assembly, replace cam with large diameter flange facing downward toward trimmer power head before replacing cutter blade assembly.
7.Remove the same two 5/16" nuts from the new cutter blade. Align cutter blade slots and fit onto cam.
8.Replace screw from Step 5. Tighten securely.
9.Replace the cam cover and secure the two 5/16" nuts from Step 6. Note: When properly aligned, cam cover fits into recess of motor housing.
10.Replace the bottom cover and secure with the 4 bottom cover screws. Tighten screws securely.
WARNING: All components must be installed and securely fastenedbeforepluggingpoletrimmer into power supply. Failure to do so may cause product damage or serious personal injury.
Note: If binding occurs after reassembly, repeat all of the previous steps making sure that cam aligns properly with cutter blade assembly.
REPLACEMENT PARTS AND ACCESSORIES
For original replacement parts and acces- sories, contact your nearest Authorized Dealer orAuthorized Service Center for this product. If they can not supply the part or accessory, contact your nearest Parts Central listed on page 12. Each Authorized Dealer, AuthorizedServiceCenter,andPartsCentral is independently owned and operated.
See pages 10 and 11 for an Illustrated Parts List.
If you need additional referral information, contact our Technical Service Department (see Technical Service).
In Canada call
TECHNICAL
SERVICE
You may have further questions about as- sembling, operating, or maintaining this
product. If so, you can visit our Technical Service web site at www.desatech.com
or contact ourTechnical Service Department at
DESA Specialty Products™
ATTN: Technical Service Specialty Products P.O. Box 90004
Bowling Green, KY
WhencontactingDESASpecialtyProducts™, have ready
•Your Name
•Your Address
•Your Phone Number
•Model Number of Product
•Date of Purchase (Include copy of receipt for written requests).
REPAIR SERVICE
Note: Only use original replacement parts. This will protect your warranty coverage for parts replaced under warranty.
EachAuthorized Service Center is independently owned and operated.
For additional Service Center or warranty information, call
WARRANTY SERVICE
If product requires warranty service, return it to nearest Authorized Service Center. You must show proof of purchase. If faulty materials or workmanship caused damage, we will repair or replace product without charge. Note: Normal wear, misuse, abuse, neglect, or accidental damage is not covered under warranty.
Ifproductrequiresservice,returnittonearest Authorized Service Center. Repairs will be billed to you at regular repair list prices.
110939 | 9 | For more information, visit www.desatech.com |