Remington 104316-01 Sharpening Saw Chain, Non-Fast Sharp Model, Sharpening Cutters, Continued

Models: 076728J, 100089-06, 099178H, 075762J, 098031J, 099039J, 100015, 100089-01, 100089-04, 100089-05, 100089-07, 076702J, 104316-01, 104317 076728J, 100089-06, 099178H, EL-1, EL-7, 075762J, 098031J, 099039J, 100015, 100089-01, 100089-04,100089-05, 100089-07,076702J,104316-01,104317 076728J, 100089-06, 099178H EL-1, 075762J, 098031J, 099039J, 100015, 100089-01, 100089-04, 100089-05, 100089-07, 076702J, 104316-01, 104317 076728J, 100089-06, 099178H EL-1, 075762J, 098031J, 099039J, 100015, 100089-01, 100089-04,100089-05, 100089-07, 076702J, 104316-01, 104317 76728k, 099178h, 100089-06, 100089-08, 107709-01, 075762j, 098031j, 099039j, 100089-04, 100089-05, 100089-07, 107714-02, 104316-04, 106890-01, 104317, 106821

1 20
Download 20 pages 39.61 Kb
Page 13
Image 13
SHARPENING SAW CHAIN

OWNER’S MANUAL

CLEANING AND MAINTENANCE

Continued

SHARPENING SAW CHAIN

(Non-Fast Sharp Model)

(Non-Fast Sharp Model) WARNING: Unplug chain saw from power source before servic- ing. Severe injury or death could occur from electrical shock or body contact with moving chain.

Sharpening Cutters

Use file guide for 30 ° filing.

1.Adjust chain for proper tension (see Saw Chain Tension Adjustment, page 7).

2.Clamp guide bar in vise to hold saw steady. Note: Do not clamp chain.

3.Press 5/32" round file (attached to file guide) into groove between top plate and depth gauge on chain. File guide should rest on both top plate and depth gauge (see Figures 20 and 21). Note: File at midpoint of guide bar.

4.Hold file guide level. Make sure 30 ° mark on file guide is parallel to center

of guide bar (see Figure 20). This will insure that you file cutters at 30 ° angle.

5.File from inside towards outside of cut- ter until sharp. Only file in this one direc- tion (see Figure 20). Note: Two or three strokes with file should sharpen cutter.

6.After each cutter if sharpened, move chain forward to sharpen next cutter. File all cutters on one side of chain.

7.Move to other side of chain and repeat process.

Sharpening Cutters WARNING: Cutting edges on chain are sharp. Use protective gloves when handling chain.

Keep chain sharp. Your saw will cut faster and more safely. A dull chain will cause undue sprocket, guide bar, chain, and motor wear. If you must force chain into wood and cutting creates only sawdust with few large chips, chain is dull.

Items Needed to Sharpen Chain

Purchase these items from your local dealer, hardware store, or chain saw supplies outlet.

5/32" round file

Depth gauge tool

File guide

Vise

30° Guide Mark Items Needed to Sharpen Chain

Filing

Direction

File

Manual background Guide

5/32" Manual background Round File

Note: This illustration shows file guide placement and filing direction for sharpen- ing cutters on left side of chain.

• Medium sized flat file

Figure 20 - File and File Guide Placement On Chain

 

Groove

 

Depth Gauge

 

(left side of chain)

Depth Gauge

Left Side of

(right side

Chain

of chain)

Groove

 

Top Plate

Top Plate

(right side of chain)

(left side of chain)

 

Right Side of

 

Chain

 

Figure 21 - Chain Part Locations

Continued

097017

13

Page 13
Image 13
Remington 104316-01, 104317 Sharpening Saw Chain, Non-Fast Sharp Model, Sharpening Cutters, Items Needed to Sharpen Chain