Rev. 1.00, 05/04, page 286 of 544
13.3.4 I2C Bus Mode Register (ICMR)
ICMR sets the communication format and transfer rate. It can only be accessed when the ICE bit
in ICCR is set to 1.
Bit Bit Name
Initial
Value R/W Description
7 MLS 0 R/W MSB-First/LSB-First Select
0: MSB-first
1: LSB-first
Set this bit to 0 when the I2C bus format is used.
6 WAIT 0 R/W Wait Insertion Bit
This bit is valid only in master mode with the I2C bus
format.
0: Data and the acknowledge bit are transferred
consecutively with no wait inserted.
1: After the fall of the clock for the final data bit (8th
clock), the IRIC flag is set to 1 in ICCR, and a wait
state begins (with SCL at the low level). When the
IRIC flag is cleared to 0 in ICCR, the wait ends and
the acknowledge bit is transferred.
For details, see section 13.4.7, IRIC Setting Timing and
SCL Control.
5
4
3
CKS2
CKS1
CKS0
0
0
0
R/W
R/W
R/W
Transfer Clock Select 2 to 0
These bits are used only in master mode.
These bits select the required transfer rate, together with
the IICX1 (IIC_1) and IICX0 (IIC_0) bits in STCR. See
table 13.3.