M306NKT3-RPD-E User’s Manual 4. Hardware Specifications

REJ10J0326-0400 Rev.4.00 Sep. 01, 2006 Page 89 of 104

4.5.2 External Dimensions of the M30800T-PTC

Figure 4.9 shows external dimensions of the converter board M30800T-PTC for a 100-pin LCC (included with the

M306NKT3-RPD-E).

130
31
50
CN2
CN1
100
81
80 51

MADE I N JAPAN

55.040.013.513.5M30800 T-PTC10.8 16.3
[External dimension when connecting 100-pin LCC socket ]
Unit: mm
*1When using the A XS4003 M295C made
by Matsushita Electric Works , Ltd.,and
IC61- 1004-051 made byYamaichi
Electronics Co .,Ltd, be sure to create foot
patterns for the holding metal fixtures in
four locations .
*2When using the A XS4003 M295C made
by Matsushita Electric Works , Ltd.,note
that the contacts of the IC socket proper
touch the PC board in the shaded section .
Therefore, be especially careful with
pattern wiring to ensure that other pins will
not be shorted . (Through holes are not
accepted.)
0.65
0.35
19.2
12.8
18.85
19.90
26.10
12.35
16.1
24.5
4-R0.25
Foot pattern forholding metal fixture *1Pattern wiring *2
13.8
21.4
27.6
19.9
Unit: mm

Figure 4.9 External dimensions of the M30800T-PTC