ShenZhen BeiJing Optoelectronics Science & Technology Co.,LTD

深 圳 市 贝 晶 光 电 科 技 有 限 公 司

￿Operation Instruction：

BJ-V300RC controller can be operated not only by key-press, but also by remote controller (See the photo of the remote controller below).

The corresponding relationships between the key-press on the remote controller and the key-press on the RGB controller:

Key-press on

 

 

 

 

 

 

the RGB

MODE

PAUSE

SPD+

SPD-

BRI+

BRI-

controller

 

 

 

 

 

 

 

 

 

 

 

 

 

Key-press on

 

 

 

 

 

 

the remote

1

2

3

4

5

6

controller

 

 

 

 

 

 

 

 

 

 

 

 

 

1．”Mode” key is used to choose a mode. The mode will be changed after each press and total 10 modes can be chosen circularly.

2.”PAUSE” key is used to pause. When it is working in order, press “PAUSE” key, the present color or gray scale will stand by. Press “PAUSE” again or other key, it will be back to the normal state.

3.“SPD+” or “SPD-” key is to change the speed. There are total 8 levels of speeds adjustable. The default speed when the controller powered is the 1st level speed, namely the maximum speed.

4.“BRI+” or “BRI-” key is to change the brightness. There are total 8 levels of brightness adjustable. The default brightness when the controller powered is the maximum.

5.After above settings done, the controller will automatically save the settings. Then when powering the controller next time, it will work under the final mode settings saved last time.

**Precaution: When operating, please press the keys gently, but don’t overexert to avoid the membrane key-presses failing to function.

Page 4 Total 7 Pages