Ricoh AP2610N Monitoring and Configuring the Printer, Changing Names and Comments, Web Browser

Monitoring and Configuring the Printer

Monitoring and Configuring the Printer

Changing Names and Comments

You can change printer names and make a comment on printers to easily iden- tify the printers listed on SmartNetMonitor for Client.

The following utilities are used to change printer names and comments.

❖SmartNetMonitor for Admin

Allows you to change names and comments when the TCP/IP protocol or IPX/SPX protocol is available. You can install SmartNetMonitor for Admin from the CD-ROM that comes with the printer. For more information about installing SmartNetMonitor for Admin, see the Setup Guide.

❖Web Browser

Allows you to change names and comments when the TCP/IP protocol is available.

Note

❒Each of the names, in a TCP/IP protocol form (printer name) and in a Net- BEUI protocol form, is changed individually. Comments are, however, common to both of them.

❒ The factory default name consists of "RNP" and the last 3 bytes of the MAC 7

address on the Network Interface Board. For example, when the MAC ad- dress is 00:00:74:62:7D:D5, the factory default name is "RNP627DD5". Comments are not configured.

SmartNetMonitor for Admin

A Run SmartNetMonitor for Admin.

B Click the [Group] menu, point to [Open LAN], and select [TCP/IP] or [IPX/SPX]. A list of printers appears.

Note

❒Select the protocol of the printer you want to change its configuration.

C On the list, Select a printer whose Network Interface Board you want to change its configuration.

D From the [Tools] menu, select [NIB Setup Tool].

The NIB Setup Tool starts up.

81