Rinnai 16e Using High Temperature Display Controllers.

Using High Temperature Display Controllers.

You will need to program the Master controller if you want to display and use

temperatures over 500C. Programming only needs to be done on Master universal

controllers; other universal controllers will not allow this, and Deluxe Kitchen Controllers

are supplied already programmed to allow high temperatures. Temperatures in

bathrooms should never exceed 500C.

STEP 1: On the Master controller only press and hold the Transfer and On/Off

buttons simultaneously (see fig 2.) until a “beep” is heard (approx. 5 seconds)

STEP 2: When the Primary controller is switched on it should be possibl e to select

temperatures higher than 50ºC. If not repeat STEP 1.

Note:

If the master controller is replaced, repeat STEP 1 above for the new controller.

TEMPERATURE CONTROLS - OPERATING