Dynamic Range Control settings
Dynamic Range Control (also known as DRC) can make quieter sounds easier to hear when your radio is used in a noisy environment by reducing the dynamic range of the audio signal.
1.Press the On/Off button to switch on your radio.
2.Press the Mode button as needed to select DAB radio mode.
3.Press the Menu button to enter the DAB menu.
4.Rotate the Tuning/Select control until 'DRC' is highlighted on the display.
5.Press the Tuning/Select control to enter the DRC adjustment mode. The current DRC setting will be indicated with an asterisk.
6.Rotate the Tuning/Select control to highlight the required DRC setting (the default is Off).
'DRC Off' - DRC is switched off, Broadcast DRC will be ignored. 'DRC high' - DRC is set as sent by broadcaster.
'DRC low' - DRC level is set to 1/2 that sent by broadcaster.
7.Press and release the Tuning/Select button to confirm the setting.
Note: Not all DAB broadcasts use the DRC function. If the broadcast does not provide DRC information, then the DRC setting in the radio will have no effect.
1
2
3
63