Operating your radio - Search tuning MW
1.For MW there is a built in ferrite aerial. Rotate your radio for best reception.
2.Press the On/Off button to switch on your radio.
3.Press and release the Radio button to select MW band. The display will show the AM Tuner.
4.Press and immediately release the Tuning Up button, your radio will scan in an upwards direction (low frequency to high frequency) and stop automatically when it finds a station of sufficient strength.
5.After a few seconds the display will update.
6.To find other stations press and release the Tuning Up button as before.
7.To scan the MW band in a downwards direction (high frequency to low frequency) press and hold down the Tuning Down button for 0.5 seconds and then release.
8.When the waveband end is reached your radio will recommence tuning from the opposite waveband end.
9.Adjust the Volume and 3D Sound switch to the required settings.
10.To switch off your radio press the On/Off button.
2 | 3 |
2
4,6
| 9 | |
7 | 9 | |
9 | ||
|
10
23