Starting your computer
To start your computer:
1Turn on the power supply by setting the power switch on the power supply to the “I” (on) position.
2Turn on your computer by pressing the power button on the front of your computer.
Troubleshooting
If the power supply fails to function properly, check the following before returning it for repair:
•Make sure that the power cord is plugged correctly into an AC power outlet and into the power supply.
•Make sure that the power switch on the power supply is switched to the “I” (on) position.
•Make sure that all power connectors are properly connected to all components.
Specifications
Input voltage | Minimum: 90 V |
| |
| Normal: 100 V ~ 240 V |
| |
| Maximum: 265 V |
| |
|
|
| |
Input frequency | Minimum: 47 Hz |
| |
| Maximum: 63 Hz |
| |
Overcurrent protection | Input fuse |
|
|
|
| ||
Active PFC | Power factor: equal to or greater than 0.99 @115V/60 Hz full load | ||
Output | +3.3V | Maximum load 18.0 A | Minimum load 0.5 A |
| +5 V | Maximum load 18.0 A | Minimum load 0.5 A |
| +12 V1 | Maximum load 18.0 A | Minimum load 1.0 A |
| +12 V2 | Maximum load 18.0 A | Minimum load 1.0 A |
| Maximum load 0.3 A | Minimum load 0.0 A | |
| +5 VSB | Maximum load 2.5 A | Minimum load 0.0 A |
| Note: +3.3 V and +5 V total output not to exceed 130 W | ||
| +12 V1 and +12V2, combined output not to exceed 36A | ||
Rated wattage | 500 W |
|
|
Peak wattage | 600 W |
|
|
|
|
|
|