Canceling the RY axis function

To cancel the RY axis function:

1Press and hold SELECT and START for three seconds. The LED turns on.

2Press the foot pedal assigned to the RY axis twice. The LED turns off and the RY axis function is canceled.

Adjusting the sensitivity

To adjust the sensitivity:

1Press and hold SELECT and START for three seconds. The LED turns on.

2 Press SELECT. The LED indicates the current sensitivity setting.

•LED solid—Medium sensitivity

•LED flashing quickly—High sensitivity

•LED flashing slowly—Low sensitivity

3Press UP on the D-pad to save the setting.

Conserving power

The racing wheel has sleep mode and automatic off functions to conserve power.

The racing wheel enters sleep mode if it is connected to the PS3 console and is not used for three minutes.

The racing wheel automatically turns off if it is not connected to the PS3 console for four minutes.

To exit sleep mode or turn on the racing wheel:

• Press START. The racing wheel turns on and the LED lights.

Low battery warning

When the battery charge is getting low, the LED on the racing wheel flashes. You need to replace the batteries.

Warning: Make sure that you insert the batteries correctly. If the batteries are inserted incorrectly personal injury or damage to the racing wheel may occur.

10