Xbox 360™ Induction Battery Charger Kit
Package contents
•Induction battery charger
•Battery packs (2)
•AC adapter
•Quick Setup Guide
Features
Induction battery charger base (front)
# | Description |
| # | Description |
1 | Charge indicator |
| 3 | On/Off switch |
2 | DC IN jack |
| 4 | Charge indicator |
Induction battery charger base (top)
| QUICK SETUP GUIDE |
Installing the battery pack
1Remove the controller battery compartment cover.
2 Install the battery pack into the controller.
3Plug the AC adapter into the DC IN jack on the charger and into a power outlet.
Using the charger
Important: The battery pack must be fully charged before you use it for the first time. Allow up to four hours for the first charge.
1Turn on the charger.
2Locate the sticker on the top of the charger, then place the controller on the charger. For best performance, center the battery pack where the sticker indicates.
If the charger detects a battery, charging starts and the glow bar lights red. When charging is complete, the glow bar lights green.
Battery notes:
•Rechargeable batteries only attain maximum charging capacity once they have been charged/discharged several times.
•The battery has a limited service life and playing time is reduced after many charging cycles.
•Do not short-circuit the battery or place it in fire.
•Unusable batteries should be disposed of as hazardous waste. Do not dispose of batteries in household waste.
Important safety information
1)Read these instructions.
2)Keep these instructions.
3)Heed all warnings.
4)Follow all instructions.
5)Do not use this apparatus near water.
6)Clean only with a dry cloth.
7)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
8)Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one wider than the other. The wide blade is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
9)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
10)Only use attachments/accessories specified by the manufacturer.
11)Unplug this apparatus during lightning storms or when unused for long periods of time.
12)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power- supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.