The first time you run the software, the Product Registration screen opens.
2Complete the Product Registration information as prompted (first time only). The main screen opens.
3To back up or restore files, follow the
Disconnecting the enclosure from your computer
You can disconnect the enclosure at any time while the computer is turned off. If, however, you want to disconnect it while the computer is on, make sure that you do it correctly.
To disconnect the enclosure while Windows is running:
Note: If a drive window is open or the hard drive enclosure is active, close any associated windows before trying to remove the enclosure.
1
2Click the device you want to unplug, then click STOP.
3When Windows notifies you that it is safe to do so, unplug the enclosure from your computer.
To disconnect the enclosure while Mac OS X is running:
1Drag the USB icon into the TRASH.
2 Unplug the enclosure.
Uninstalling the backup software
To uninstall the backup software in Windows:
1Open the Control Panel.
2Click Add or Remove Programs (Windows XP) or Programs and Features (Windows Vista).
3Click Roxio BackOnTrack, then click Change/Remove (Windows XP) or Uninstall (Windows Vista).
4Follow the
5After the software is uninstalled, restart your computer if prompted.
Troubleshooting
I do not see the additional drive in my system
Windows users: Partition and format the new hard drive by using Disk Management in Windows.
Macintosh users: Partition and format the new hard drive by clicking Disk Utilities in the Utilities folder, then clicking your external enclosure.
My computer does not detect the enclosure
•Make sure that the USB cable is connect firmly to your enclosure and computer.
•Make sure that the USB cable is not broken.
•Open the enclosure and make sure that all of the connections are securely fastened.
•Use the rear USB ports on the back of the computer instead of the front USB ports.
•Check for motherboard compatibility issues.
•Check for hard drive compatibility issues.