RocketFish RF-RBWHP01 manual

RF-RBWHP01 Rocketboost Wireless Stereo Headphones

Package contents

		AC power adapter
	Headphones	Rechargeable
	Headphones	batteries (2)
		batteries (2)
		Docking station

3.5 mm-to-RCAadapter cable

RCA audio cable	User Guide	Quick Setup Guide

Installingtheheadphonebatteries

same color jacks together (the white to the white and the red to the red).

Note: If your audio source has only a 3.5 mm“phones” or“line out” jack, use the supplied 3.5 mm-to-RCA adapter cable.

ConnectingtheACadaptertothedockingstation

Caution:To avoid risk of fire and to prevent damage, only use the AC adapter supplied with your wireless headphones. Make sure that the power supply outlet matches the AC adapter’s 120V before making the connection.

1Connect the AC adapter connector to the docking station’s DC IN jack.

2Connect the AC adapter plug to an AC power outlet.The STANDBY indicator lights red steadily

when the docking station is plugged in.

Caution: Plug the AC adapter into the power outlet only after all other connections are completed.

Chargingtheheadphones

Important: Before using the wireless headphones for the first time, make sure the batteries are fully charged for at least 16 hours.This will help provide a longer operating lifetime for the batteries.

To join the headphones to the docking station:

1Set the HUB STATUS switch on the docking station to ENABLE if this is your first Rocketboost product set.

•The power indicators turn green when the HUB STATUS switch is set to ENABLE.

•The power indicators turn blue when the HUB STATUS switch is set to DISABLE.

2Press and hold the CONNECT button on the docking station for more than three seconds to put it into joining mode.The power indicator starts blinking rapidly and the unit will stay in joining mode for 30 seconds.

3Press and hold the CONNECT button on the headphone for more than three seconds so the docking station and headphone enter joining mode.

•The power indicator lights steadily if the joining was successful.

•The power indicator blinks slowly if the joining was not successful.

For more information, see your User Guide.

Listeningthroughtheheadphones

1 Set the headphone’s volume level to the minimum.

Rocketboost network notes:

Every Rocketboost network must contain one hub device, which helps devices join the network. The network can have only one hub, which you can enable using the hub switch on the back of all Rocketboost senders and sender/receivers. If this is your first Rocketboost product, you should make the docking station the hub, if you already have Rocketboost products, you should disable hub mode on the docking station.

Important: Hub devices must always have power for your network to operate. The hub device can be in standby (power-saving) mode, but must stay plugged in.

The headphones are powered by two AA rechargeable batteries. Each earpiece houses one battery.

Notes:

• Do not install non-rechargeable batteries.

• Make sure that all batteries are installed correctly.

1With an earpiece cushion facing you, unlock and remove

left and right earpiece cushions by slightly rotating them clockwise, then

pulling them away from the headphones.

Place the headphones onto the docking station. Make sure that the headphone charging contacts and the docking station charging pins make contact.

•The docking station charging indicator turns red to indicate the headphones are charging.

•When the headphones are fully charged (which takes about eight to nine hours), the docking station charging indicator turns green.

Notes:

L R

Headphone charging contact

Docking station charging pin

2	Turn on the headphones and docking station. Make sure that your docking station and headphones
	are wirelessly“joined.”
	The power indicators light steadily if the docking station and headphones are joined and blink
	slowly if they are not. If they are not joined, see“Establishing Communication” above or in the User
3	Guide.
3	Put your headphones on your head. Adjust the angles of the left and right ear pieces until you feel
4	comfortable.
4	Turn on your audio source and begin playback.
	If there are multiple sources in the Rocketboost network, press the SOURCE button on the

2 Insert one AA rechargeable battery into each battery compartment. Make sure to align the + and - symbols on the batteries with the symbols in the battery compartments.

3Replace the left and right cushions.

Connectingthesystemtoanaudiosource

Caution:To prevent damage to your system, make sure all components are turned off before making connections.

•The batteries will last up to ten hours with continuous use

(depending on the headphone volume level and distance from the docking station).

•The headphones can be charged even if the docking station or headphones are turned off.

Turningonthesystem

1Set the POWER switch on the left earpiece of headphones to ON.

2Press the POWER button on the docking station.

headphones to find the source you want to listen to.TheTX indicator on the docking station (if it is a

hub) blinks several times, indicating that the current audio source is changing.

5 Adjust the headphone volume to your normal listening level.

Caution: Continuous use at high volume may permanently damage your hearing.

Note: If the system is connected to an A/V receiver with an external amplifier, turn off the amplifier to prevent hearing sound from the amplifier speakers.

In a typical user installation, the docking station is connected to the audio output of aTV. Other devices with audio outputs could be used as well.

To connect the docking station to your audio source:

Using the supplied RCA audio cable, connect the audio output jacks of your audio source to the AUX INPUT jacks of the docking station. Make sure that you connect the

Audio source

Docking station back panel

RCA cable (supplied)

Establishingcommunication

The headphones and docking station must be "joined" or wirelessly connected to each other so that audio can be sent from the docking station to the headphones.

Since the headphones and docking station are pre-joined at the factory, you can skip this step and go to the Listening through the headphones step. Follow this procedure only if you need to rejoin the headphone and docking station. For information on how to use this product with an existing Rocketboost network, see your User Guide.

Turningoffthesystem

1Set the POWER ON/OFF switch located on the headphone’s left earpiece to OFF.

2Press and hold the POWER button on the docking station.The power indicator on the docking station goes off.