2Press and release the link button on the bottom of the mouse. The two devices establish their communication link. The receiver’s status light first blinks green, then turns red when the connection is made.
Receiver link button
The mouse is now ready to use.
Operating tips
For best performance and RF reception:
•Place the receiver at least 8 inches (20 cm) away from all electrical devices, such as your monitor, speakers, or external drives. If necessary, use the extension cable to move the receiver away from the computer (if your computer is too close to other electrical devices). Plug the receiver into an extension cable (USB A male to USB A female, not included), and plug the extension cable into the computer.
•Avoid using the mouse on a metal surface. Metals such as iron, aluminum, or copper shield the radio frequency transmission and may slow down the mouse’s response time or cause the mouse to fail temporarily.
•The mouse enters a Sleep mode whenever your computer does. To activate the mouse, just move or click the mouse.