Roland 115, 115X, 210 115X

Panel descriptions

In the SUB WOOFER mode, this adjusts the frequency

range played back from the unit’s speaker. Adjust this

according to the character of the connected bass guitar,

as well as the performance environment.

* This is disabled in Full Range mode.

The relationship between the FREQUENCY knob

indicator and the active frequency range is shown below.

fig.02-02

This adjusts the total volume level of the unit’s internal

speaker.

When connecting the D-BASS 210/115 SUB OUT jack to

the 115X’s INPUT jack, adjust the volume balance

between the 115X and the D-BASS 210/115 speaker

output.

* Does not affect THRU OUT.

This switches the power on and off.

* If you need to turn off the power completely, first turn off the

POWER switch, then unplug the power cord from the power

outlet. Refer to “Power Supply” (p. 7).

* Once the connections have been completed, turn on power to

your various devices in the order specified. By turning on

devices in the wrong order, you risk causing malfunction and/

or damage to speakers and other devices.

1. Turn on the device connected to the D-BASS 115X’s

input jack.

2. Turn on the D-BASS 115X.

3. Switch on any equipment connected to the D-BASS

115X’s SUB OUT jack.

Turn off the devices in the reverse order to which they

were switched on.

*This unit is equipped with a protection circuit. A brief interval

(a few seconds) after power up is required before the unit will

operate normally.

*Always make sure to have the volume level turned down before

switching on power. Even with the volume all the way down,

you may still hear some sound when the power is switched on,

but this is normal, and does not indicate a malfunction.

Frequency

(Hz)

60 240

Variable Range

OUTPUT LEVEL

115X