67
Some parameters (such as Rate or Delay Time) can be set in terms of a note
value instead of a time value.
Such parameters provide a Sync switch (Sync SW) that allows you to switch
between setting the parameter as a note value or as a numerical value.
If you want to set it as a note value, set the Sync SW to ON.
* If a parameter that’s chosen in Control Assign for multi-effect control has its Sync SW
to ON, you won’t be able to use multi-effect control to control that parameter.
About Note Value Description
1/64T
()
Sixty-fourth-note triplet
1/64( ) Sixty-fourth note
1/32T( ) Thirty-second-note triplet
1/32( ) Thirty-second note
1/16T( ) Sixteenth-note triplet
1/32.( ) Dotted thirty-second note
1/16( ) Sixteenth note
1/8T( ) Eighth-note triplet
1/16.( ) Dotted sixteenth note
1/8( ) Eighth note
1/4T( ) Quarter-note triplet
1/8.( ) Dotted eighth note
1/4( ) Quarter note
1/2T( ) Half-note triplet
1/4.( ) Dotted quarter note
1/2( ) Half note
1/1T( ) Whole-note triplet
1/2.( ) Dotted half note
1/1( ) Whole note
2/1T( ) Double-note triplet
1/1.( ) Dotted whole note
2/1
()
Double note
ARX-01_e.book 67 ページ ２００８年２月１９日 火曜日 午後４時７分