Roland 60S, 80S, AT90S

Before You Start Playing

The confirmation message appears on screen.

fig.00-40.eps

If you touch <Cancel>, the Factory Reset will not be

performed, and you will return to the System screen.

5. When you touch <OK>, the Factory Reset

operation will begin, and the settings will return

to the factory-set condition.

NOTE

Never switch off the power while this operation is in

progress!

fig.00-40.eps

NOTE

Loading factory default settings will erase any Registrations

currently in the memory of the AT-90S/80S/60S. To save the

registrations you are currently using, refer to “Saving

Registration Sets to a Floppy Disk” (p. 84).

NOTE

If you want to restore the factory settings for only the

Rhythm [Disk] button and [World] button, refer to p. 70, 73.

You can also use the following method to return to the

factory-set condition.

1. Make sure there is no floppy disk in the disk

drive before carrying out the procedure.

2. Turn off the power.

3. While holding down the [One Touch

Program] button, press the [Power On] switch

to turn the power on.

fig.00-41

Hold down the [One Touch Program] button until

the following is displayed.

fig.00-40.eps

NOTE

Never switch off the power while this operation is in

progress!

Power On Program

One Touch

Set