Roland FP-7 Using a Pedal to Switch Registrations

91
Saving Your Favorite Performance Settings
You can assign a pedal to successively switch registrations. Each time you press the
pedal, you will switch to the next registration. Before a concert or other performance, you
can save the appropriate registrations in the order in which you’ll use them, and then
step smoothly through the registrations while you play.
For details on handling USB memory, refer to “Using USB Memory” (p. 23).
fig.Panel-RegistPedal.eps
1.
Press the [Function] button.
2.
Press the [Registration] button.
The Registration screen appear.
3.
While holding down the [Display] button, use the [-] [+] buttons to select
“Shift.”
4.
Use the [-] [+] buttons to change the setting.
Using a Pedal to Switch Registrations
Setting Description
Off
Pressing a pedal connected to the FC2 connector or FC1 connector will not switch
registrations.
The functions assigned to the FC2 jack and FC1 jack will be available for use (p. 118).
FC 2
The pedal connected to the FC2 jack can be used only for switching registrations.
In this case, the function assigned to the FC2 jack cannot be used.
FC 1
The pedal connected to the FC1 jack can be used only for switching registrations.
In this case, the function assigned to the FC1 jack cannot be used.
FP-7-e.book 91ページ ２００６年１２月１４日 木曜日 午前１０時５７分