19
Before You Begin Playing
You can adjust the brightness of the HPi-6S’s display.
1.
To adjust the contrast of the screen, turn the [Contrast]
knob located at the back of the music rest.
fig.Contrast-e
Some Notes on Using the LCD Screen
• Never remove the liquid crystal display cover at the back of the
music rest. By removing it you risk electrical shock and/or
malfunction.
• You may see vertical lines in the screen, but this is due to the
structure of a liquid crystal display, and does not indicate a
malfunction. By using the [Contrast] knob to adjust the contrast of
the screen, you can minimize these lines.
• The contrast of the screen may be affected by the temperature.
A song you’ve recorded on the HPi-6S can be saved by copying it to
separately sold USB memory (p. 85). You can also copy songs to a
floppy disk using a separately sold floppy disk drive.
You can also play back SMF music files or audio files (p. 44) saved
on USB memory or a floppy disk.
Use USB memory and floppy disk drive available from
Roland. Proper operation cannot be guaranteed if other
USB device is used.
■
Connecting USB Memory
1.
Connect the USB memory to the External Memory
connector.
fig.ConnectUSBMem.eps
Carefully insert the USB memory all the way in—until it is firmly in
place.
If you’re using new USB memory or floppy Disk, you’ll need
to initialize (format) it on the HPi-6S. For details, refer to
“Formatting Media (Format)” (p. 80).
■
Installing the Floppy Disk Drive
Attach the floppy disk drive as shown the figure, using the mounting
holes on the HPi-6S’s bottom panel.
For details of the attachment, refer to the owner’s manual of
the floppy disk drive.
Adjusting the Contrast of the
Screen
Rear of the Music Rest
Liquid Crystal Display Cover
Using USB Memory/Floppy Disk
NOTE
External Memory
Connector Holder
External Memory Connector
HPi-6S-e.book 19ページ ２００７年１１月１９日 月曜日 午前１０時３６分