8
Chapter
1Situation practical
use technique
Chapter
2
Chapter
3 Applied technique
Chapter
4 Appendix
Situation
The outstanding
features of the R-09HR

What is a

good level?

Bands are louder than normal everyday sounds.
Set the mic gain in the back of the R-09HR to
LOW.

Set to HIGH for quieter sounds

Set to LOW for louder sounds

Set LIMITER/AGC to ON
Also, you should turn on the limiter. The limiter is
a feature that suppresses noise by lowering the
volume level when the sound input is too high.

Placing

the R-09HR
When instruments are placed in various locations
in a room, like a rehearsal studio, you should
position the R-09HR in the middle of the studio
to record the sound of each instrument equally.
The microphone should be placed at about
table height.
If the mic is placed on the fl oor, the sound is
muffl ed and unclear; if it is placed too high, you
lose the bass range and the sound becomes tinny.
Drums
Bass Amp
Guitar Amp
PA Speakers for Vocals
and Keyboard
and Keyboard
Remote
PA Speakers for Vocals
Place
in the middle
Of course, once the R-09HR is setup, you can use
the remote to adjust the recording level or to
start/stop the recording.
Recording band performances
Point
1Point
2
2
R-09HR_guide_e1.indd 8 07.12.27 11:30:38 AM