3
118a
• Should you remove screws, keep them in a
safe place out of children’s reach, so there is no
chance of them being swallowed accidentally.
.................................................................................................
add
• Do NOT place your fingers inside the shell, as
you may hurt yourself or cause damage to the
PDX-8. Or when changing the head, do NOT
touch any of the internal parts. Also, do not
insert your fingers into the hole of the
mounting bracket.
fig.Stand.j
fig.Stand.j
291a

In addition to the items listed under “USING THE

UNIT SAFELY” on page 2–3, please read and

observe the following:

Placement
354a
• Do not expose the unit to direct sunlight, place it near
devices that radiate heat, leave it inside an enclosed
vehicle, or otherwise subject it to temperature
extremes. Excessive heat can deform or discolor the
unit.
356
• Do not allow rubber, vinyl, or similar materials to
remain on the unit for long periods of time. Such
objects can discolor or otherwise harmfully affect the
finish.
Maintenance
401a
• For everyday cleaning wipe the unit with a soft, dry
cloth or one that has been slightly dampened with
water. To remove stubborn dirt, use a cloth impreg-
nated with a mild, non-abrasive detergent. After-
wards, be sure to wipe the unit thoroughly with a soft,
dry cloth.
402
• Never use benzine, thinners, alcohol or solvents of any
kind, to avoid the possibility of discoloration and/or
deformation.
Additional Precautions
553
• Use a reasonable amount of care when using the unit’s
buttons, sliders, or other controls; and when using its
jacks and connectors. Rough handling can lead to
malfunctions.
556
• When connecting / disconnecting all cables, grasp the
connector itself—never pull on the cable. This way you
will avoid causing shorts, or damage to the cable’s
internal elements.
558a
• To avoid disturbing your neighbors, try to keep the
unit’s volume at reasonable levels. You may prefer to
use headphones, so you do not need to be concerned
about those around you (especially when it is late at
night).
558d
• This instrument is designed to minimize the extra-
neous sounds produced when it’s played. However,
since sound vibrations can be transmitted through
floors and walls to a greater degree than expected, take
care not to allow these sounds to become a nuisance to
neighbors, especially when performing at night and
when using headphones.
add

• Due to the nature of the materials used in the sensor,

changes in room temperature may affect the sensi-

tivity of the sensor.

Head Sensor
Head Sensor
Rim Sensor
IMPORTANT NOTES
PDX-8_e 3 ページ ２００６年７月１０日　月曜日　午後２時１９分