49

Using the compressors and equalizers

fig.compEQ03.eps
Pressing the compressor/equalizer toggle button switches between the screens for the compressor and the
equalizer.
fig.compEQ04.eps
* The HI and LO bands are shelving type and the MID band is peaking type.
Setting the compressors and equalizersSetting the equalizers
Meaning Changing the settings
1Channel currently displayed Press the [COMP/EQ] button for each channel
2 Equalizer bypass Use the [CURSOR/VALUE] knob to set the cursor, and then press the knob
3 Equalizer Q
1. Use the [CURSOR/VALUE] knob to set the cursor
2. Press the [CURSOR/VALUE] knob
3. Use the [CURSOR/VALUE] knob to change the value
4. Press the [CURSOR/VALUE] knob to confirm
4 Hi band cutoff frequency/gain
5 MID band center frequency/gain
6 LO band cutoff frequency/gain
7 Gain of each band
Adjust each of the [LO], [MID] and [HI] knobs

Equalizer setting screen Compressor setting screen

VS-100_r_e.book 49ページ 2009年3月25日 水曜日 午前9時34分