35
Mic Select
The MIC SEL display alternates between Headset and Speaker with each key press. When active the Headset or Speaker icon
appear in the keypanel display.
To switch between active sources, do the following:
> On the KP 32 CLD, press down on the MIC SEL switch (see Figure 2 on page 6).
The audio source is changed.
NOTE: The audio source chosen directly affects the listen destination to which the audio is sent.
NOTE: You must configure the source on the keypanel for the type of operation you require. For more
information, see “Audio Options Menu, Headset” on page 62, “Audio Options Menu, Panel Mic”
on page 72, or “Audio Options Menu, Headset Mic” on page 63.
TABLE 5. Source Configuration Matrix and Display icons
ALWAYS ON/ENABLED SWITCHED DISABLED ICON DISPLAYED
Panel Mic
Front and Rear
Front Rear
Rear Front
Front Rear
Rear Front
Front and Rear No icons display on the keypanel.
Headset Mic
Front and Rear
Front Rear
Rear Front
Front Rear
Rear Front
Front and Rear No icons display on the keypanel.