Ruby Tech GS-5124C manual

RUB TECHTE	Gigabit Switch
	Unmanaged Switch

GS-5124C

GS-5124C:

24-Port Unmanaged Gigabit Ethernet Switch

Switch Gigabit

Key Features

24-Port 10/100/1000 Mbps GbE Switch

Provides two Gigabit Ethernet Modules options: 1000Mbps RJ-45/1000Mbps Fiber SFP (single-mode/multi-mode) for remote uplink Conforms to IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T and IEEE 802.3x flow control standards

Supports 10/100Mbps auto-detect half/ full duplex and 1000Mbps at full duplex Supports TP interface auto MDI/MDI-X

function for auto TX/RX swap Supports 802.3x flow control pause packet for full duplex LEDs to indicate: 10/100/1000Mbps, Link /Act. and Power Status Slim & Compact design RoHS Compliance

Overview

GS-5124Cis a cost-effective switch that meets all IEEE 802.3/u/x/z Gigabit, Fast Ethernet specifications. With 48 Gbps switch fabric, the switch improves your network performance. You can connect to backbone or make Gigabit to the PC to perform high speed transfer. The switch has a 8K MAC Address Table and provides a 400K on-chip buffer. It is suitable for workgroups or WAN edge application. The versatile and compact 1RU height design of the GS-5124Cenables the device to be rackmounted in a standard 19 inch rack, while conserving valuable rack space.

Easy Installation and Configuration

GS-5124Cconforms to plug and play for easy installation and use. With diagnostic LEDs, network and port status can be easily monitoring and trouble-shooting. GS-5124Calso build in wiring crossover on all ports allows connection to server or PC without worrying about cabling.

Technical Specifications

Standard compliance:IEEE 802.3 10Base-T Ethernet(twisted-pair copper)IEEE 802.3u 100Base-TX Ethernet(twisted-pair copper)IEEE 802.3ab 1000Base-T Ethernet(twisted-pair copper)IEEE 802.3Z 1000Base-T Ethernet(Gigabit Fiber)ANSI/IEEE 802.3 Auto-negotiation MAC Address: 8K Network Interface: 24 10/100/1000Mbps RJ-45 ports Flow control:IEEE802.3x compliant for full-duplexBack pressure flow control for half-duplex Media:10BASE-T: UTP Cat. 3, 4, 5 or up100BASE-TX: UTP Cat. 5 or up1000BASE-T: UTP Cat. 5 or up Transmission Mode: 10/100Mbps, full/half-duplex (Auto-sensing) Transfer Rate:10Mbps: 14880pps (64 Bytes Package)100Mbps: 148800pps (64 Bytes Package)

1000Mbps: 1488000pps (64 Bytes Package) Buffer Memory: 400KB on chip frame buffer Switching Method: Store & forward

LED Description

	LED	Color	Function
Global	POWER	Green	Lit when +5V power is coming up
Global	CPU/	Green	Blinks when CPU is activity
	ACT
Port	LINK/	Green	Lit when connection with remote device
1-24	ACT		is good
			Blinks when any traffic is present
Port	1000/	Green/	Lit Green when TP link on 1000Mbps
1-24	100Mbps	Amber	speed
			Lit Amber when TP link on 100Mbps
			speed
			Off when 10Mbps or no link occur