Runco CL-700 - page 9

1. Overview 5

Controls and Functions

❚Control Panel

1. POWER LED

Indicate the status of the power

■ Orange when the AC power cord is plugged into the wall outlet (standby mode). Once in

the standby mode, you can turn on the projector by pressing ON key on the remote control for

ONE second.

■

Green when the power is turned on (operational mode).

■

Flashing Orange for the first 30 seconds after power-up indicating that the lamp is warming up.

■

Flashing Green for one minute after the projector was powered off indicating that the lamp is cooling

down.

2. LAMP LED

Indicates the status of lamp

■

Red when the lamp has developed a problem. Please contact your Runco dealer for

assistance.

3. Zoom Ring

Adjust the size of the image

■Rotate right to enlarge the image, and rotate left to make the image smaller.

4. Focus Ring

Adjust the focus of the image

■Rotate the focus ring right or left to focus the image.

Power Lamp