Salton JM418SS TROUBLESHOOTING, POLARIZED PLUG, SHORT CORD INSTRUCTIONS, ELECTRIC POWER

12

TROUBLESHOOTING

Possible Correction

Try juicing slower, as wet produce is more likely to build up in Lid.

To release pulp, lightly tap on the side of the Lid. Empty Pulp

Basket if full.

Blade Basket may not have been seated correctly, causing it to

become unseated during use. Should this be the case, check the

gear teeth of the Blade Basket and the Motor Base for damage. If

any teeth are damaged, call Consumer Service at (800) 233-9054.

Snug seating is desirable. To insert, try seating the Blade Basket

on a different Hub position. To remove, turn Juice Bowl in a

clockwise direction.

This may be an isolated situation resulting from the varied texture

and moisture content of the produce. Stop juicing, scrape off pulp

and begin again, alternating types of produce.

Pulp may have built up on the Blade Basket. Clean the Blade

Basket and try alternating different types of produce while juicing.

Note: Because of the Juiceman’s powerful motor, a small amount of

noise and/or vibration is normal when the Juicer is turned on and as

it comes to a complete stop. All Juicers will sound slightly different.

Juice the produce as slowly as possible. Keep the Pulp Basket

emptied for good air flow through machine.

Juice slowly so that the Blade Basket does not fill up too quickly

with juice. Keep Pulp Basket emptied to allow good air flow

through the machine.

Juice slowly to avoid excessive pulp buildup inside the Lid and

Juice Bowl.

Symptom

Pulp builds up

excessively in the

back of

the Juicer Lid.

Bottom of

Feed Tube is

damaged.

Blade Basket is

difficult to:

•insert onto

the Hub;

•remove from

the Hub.

Too much pulp

builds up on

Blade Basket.

Excessive noise or

vibrations occur

after Juicer is

turned on.

Juice sprays out

of the Spout.

Juice leaks

between Juice

Bowl and Lid.

Pulp in juice.

POLARIZED PLUG

This appliance has a polarized plug (one blade is wider than the other).

To reduce the risk of electric shock, this plug is intended to fit into a

polarized outlet only one way. If the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit, contact a qualified electrician.

Do not attempt to modify the plug in any way.

SHORT CORD INSTRUCTIONS

A short power-supply cord (or detachable power-supply cord) is

provided to reduce the risk resulting from becoming entangled in or

tripping over a longer cord.

Do not use an extension cord with this product.

ELECTRIC POWER