Guided Tour - VX3500 Rear Panel
1 | 3 | 4 | 5 | 8 | 9 |
|
|
|
|
|
|
|
|
|
|
|
|
Hartke Systems |
|
| EFFECT | DIRECT OUT | ||
| SPEAKER | SEND | POST | NORMAL | ||
Distributed Exclusively by |
| OUTPUT |
| PRE | GND LIFT | |
Samson Technologies Corp. |
|
|
|
|
| |
Hicksville, New York 11802 |
| MINIMUM |
|
|
| |
| MODEL 3500 | ~ AC INPUT |
|
|
| |
| IMPEDANCE |
|
|
| ||
| 350 WATTS | 115V/230V 50/60Hz |
|
|
| |
| FUSE | 4 OHMS |
|
|
| |
8 | = 240 WATTS |
|
|
| ||
8A/250V, 300W (115V) |
|
|
|
| ||
4 | = 350 WATTS |
| RETURN | BALANCE |
| |
4A/250V, 740W (230V) |
|
| ||||
CAUTION |
|
|
|
| 0 |
|
TO PREVENT SHOCK, DO NOT OPEN. NO USER |
|
|
|
|
| |
SERVICEABLE PARTS INSIDE. REFER SERVIC- |
|
|
|
|
| |
ING TO QUALIFIED SERVICE PERSONNEL. TO |
|
|
|
|
| |
PREVENT FIRE OR SHOCK HAZARD, DO NOT |
|
|
|
|
| |
EXPOSE TO RAIN OR MOISTURE. |
|
|
|
|
| |
ASSEMBLED | SERIAL NUMBER |
|
|
|
|
|
IN R.O.K. |
|
|
|
| SEND RETURN |
|
2 | 3 | 6 | 7 | 10 |
1.Fuse sled - This contains a fuse holder and shows the currently selected voltage rating for your Model 3500. Make sure the voltage rating is correctly set before powering up the amplifier! Fuse ratings are 8 amp for 115 vac and 4 amp for 230 vac. For information on how to change the voltage rating, see Appendix C on page 18.
2.AC input - Connect the supplied standard
3.Speaker output – The VX3500 internal speaker system is connected here.
WARNING: In order to get the full 350 watts of power and the maximum output volume, the VX3500’s internal speaker system has an impedance of 4 ohms. Do not connect additional speakers to the SPEAKER OUTPUT, unless you disconnect the internal speakers. Connecting external speakers without disconnecting the internal speaker system may result in serious damage to your amplifier that will not be covered under the warranty.
4.Fan - The fan provides vital cooling to your Model 3500. Make sure that it is kept free of all obstructions and that cool, fresh air is accessible at all times. Also, try to ensure that the Model 3500 is used in a
6