10
ENG
Plug & Play Feature
Plug & Play
Auto Store Exit
Ant. Input Check
Exit
P 1
471 MHz 48 %
When the television is initially powered ON, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1If the television is in Standby mode, press the POWER button
on the remote control.
Result: The message “Plug & Play” is displayed. It flickers for a
little while and then the “Language” menu is automatically
displayed.
2Press the ▲or ▼button to select required language. Press the
MENU button to enter the language, and then the message “Ant.
Input Check” is displayed.
➣If any language is not selected on the “Language” menu, the
“Language” menu will be displayed about 30 seconds later.
3Make sure that the antenna is connected to the TV. And then press
the +or –button to store the channels (refer to “Storing the
Channels Automatically” on page 12).
Result: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range.
4When searching and storing is complete, the “Time” menu is
displayed.

5Press the +or –button to move to the hour or minute. Set the hour

or minute by pressing the ▲or ▼button (refer to “Setting and
Displaying the Current Time” on page 23).
6When you have finished, press the MENUbutton.
Result: The message “ENJOY YOUR WATCHING” is displayed,
and then the channel which has been stored will be
activated.
7If you want to reset this feature...
1Press the MENUbutton.
2Press the ▲or ▼button to select the “Function”, and then
press the +or –button.
3Select the “Plug & Play” by pressing the ▲or ▼button, and
then press the +or –button.
Result: The message “Plug & Play” is displayed.
Move Exit
Time
Clock 11 : 35
Enjoy Your Watching...
Select Enter Exit
Language : English
Time
Plug & Play
Blue Screen : Off
Child Lock
Low Noise AMP : Off
Function
ENJOY YOUR WATCHING
Time
Clock - - : - - AM
KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 10