Samsung Selecting the Sound Mode depending on the model, Switching the Sound Off Temporarily

KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 22

Selecting the Sound Mode (depending on the model)

ENG

The “S.MODE I-II” button displays/controls the processing and output of the audio signal. When power is switched ON, the mode is automatically preset to either “Dual-I” or “STEREO”, depending on the current transmission.

	Type of broadcast	On-screen indication
	Regular broadcast	MONO	(Normal use)
	(Standard audio)
	Regular +	MONO ↔ MONO
NICAM	NICAM Mono	NICAM	(Normal)
Stereo	NICAM Stereo	STEREO	↔ MONO
		NICAM	(Normal)
	NICAM Dual-I/II	Dual-I→ Dual-II→ MONO
		NICAM NICAM (Normal)
		→	→
	Regular broadcast	MONO (Normal use)
	(Standard audio)
A2
	Bilingual or Dual-I/II	Dual-I	↔ Dual-II
Stereo
	Stereo	STEREO	↔ MONO
			(Forced Mono)

➣◆ If the receiving conditions deteriorate, listening will be easier if the mode is set to the “MONO” position using the S.MODE I-IIbutton.

◆If the stereo signal is weak (or if intermittent Stereo-Mono) and automatic switching occurs, then switch to the “MONO” mode.

◆When receiving mono sound in the AV mode, connect to the “L” input jack on the panels. If the mono sound comes out only from the left speaker, then press the S.MODE I-IIbutton.

Switching the Sound Off Temporarily

You can switch the sound off temporarily, for example you may wish to answer the telephone.

1 Press the MUTE button.

Result: The sound is switched off and “ ” is displayed.

2When you wish to turn the sound back on at the same volume as

before, press the MUTE button again (or either of the volume buttons).

22