9
ENG
The mains lead is attached to the rear of the television.
1Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the TV set and
the frequency is 50 or 60Hz.
2Press the “ ” (ON/OFF) button on the front of the television.
Result:The Standby indicator lights up on the front panel.
3Press the POWER button on the remote control to switch the
television on.
Result:The programme that you were watching last is re-
selected automatically.
4To switch your television off, press the “ ” (ON/OFF) button
again on the front of the television.

Placing Your Television in Standby mode

Your television can be placed in Standby mode, in order to reduce:
Power consumption
Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
The television is placed automatically in Standby mode when you
turn it on.
1Press the POWER button on the remote control.
Result: The screen is turned off and the Standby indicator on
the front of the television lights up.
2To switch the screen back on, simply press the POWER button
again on the remote control.
Do not leave your television in standby mode for long
periods of time (when you are away on holiday, for example).
In this case, you should switch it off completely.

Switching Your Television On and Off

KS1_01818B_02_ENG_UMG 11/18/03 10:09 AM Page 9