Samsung 650FP Rear

Switches from PC mode to Video mode. Selects the input source that an

external device is connected to.

[PC] → [DVI] → [AV] → [Component] → [HDMI] → [MagicInfo] → [BNC]

Note

•MagicInfo can only be enabled when a network box is connected.

• The HDMI port and network box cannot be connected at the same time.

Push the PIP button to turn the PIP screen On / Off.

More than one PIP cannot overlap on screen as BNC and the component

use the same terminal.

•PC : DVI / AV / Component / HDMI

•BNC : DVI / AV / HDMI

•DVI / AV : PC / BNC

•Component : PC

•HDMI : PC / BNC

Use this button for turning the LCD Display on and off.

Automatically detects the surrounding brightness.

Note

This function is activated only on the models equipped with an auto bright-

ness sensor.

Shows PowerSaver mode by blinking green

Note

See PowerSaver described in the manual for further information regarding

power saving functions. For energy conservation, turn your LCD Display

OFF when it is not needed or when leaving it unattended for long periods.

Aim the remote control towards this spot on the LCD Display.

Rear

Note

For detailed information concerning cable connections, refer to Connecting Cables under

Setup. The LCD Display 's configuration at the back may vary slightly depending on the model.

Introduction