Samsung PL50A650T1F, BN68-01824A-00, PL58A650T1F, PL63A650T1F Wireless Network Setup, Button

Wireless Network Setup

➣The menu is activated only if the Samsung Infolink Wireless adapter is connected. (See page 91)

Auto Setup

➣If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP)

Settings are automatically configured.

➣The wireless IP sharer to be connected to this product must support DHCP.

1Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Setup, then press the ENTER button.

2Press the ▲ or ▼ button to select Wireless Network Setup, then press the ENTER button.

Setup

Network selection	: Wireless
Cable Network Setup
Wireless Network Setup		►
V-Chip
Caption
External Settings
Entertainment	: Off
Energy Saving	: Off
PIP
SW Upgade

3Press the ENTER button to select Internet Protocol Setup.

4Press the ▲ or ▼ button to select Auto Setup, then press the ENTER button.

➣The Internet Protocol is set automatically.

➣Select Access Point Select to check the network connectivity. (Refer to page 95)

Press the EXIT button to exit.

Wireless Network Setup

Internet Protocol Setup	: Auto
		AutoSetup
Network Test		Manual Setup
Access Point Select	: AP1
IP Address	:	0	0	0	0
Subnet Mask	:	0	0	0	0
Gateway	:	0	0	0	0
DNS Server	:	0	0	0	0
Move			Enter		Return

Manual Setup

1Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Setup, then press the ENTER button.

2Press the ▲ or ▼ button to select Wireless Network Setup, then press the ENTER

button.

Setup

Network selection	: Wireless
Cable Network Setup
Wireless Network Setup		►
V-Chip
Caption
External Settings
Entertainment	: Off
Energy Saving	: Off
PIP
SW Upgade

3Press the ENTER button to select Internet Protocol Setup.

4Press the ▲ or ▼ button to select Manual Setup, then press the ENTER button.

5Press the ▲, ▼, ◄ or ► button to move to an item, and press the numeric button to configure the selected item. Press the ENTER button.

➣If you want to use a static IP address, refer to the user manual of your wireless IP sharer.

➣Select Access Point Select to check the network connectivity. (Refer to page 95)

Press the EXIT button to exit.

Wireless Network Setup

Internet Protocol Setup	: Auto Setup
		Auto Setup
Network Test		Manual Setup
Access Point Select	: AP1
IP Address	:	0	0	0	0
Subnet Mask	:	0	0	0	0
Gateway	:	0	0	0	0
DNS Server	:	0	0	0	0
Move			Enter		Return
Wireless Network Setup
Internet Protocol Setup	: Manual Setup
Network Test
Access Point Select	: AP1
IP Address	:
		0	0	0	0
Subnet Mask	:	0	0	0	0
Gateway	:	0	0	0	0
DNS Server	:	0	0	0	0
Move			Enter		Return

English - 94