15
English
03 Basic Features
4. Navigate to the “Settings” tab on the display dialog-box.
The correct size setting (resolution) y
[Optimum: 1920 X 1080 pixels]
If a vertical-frequency option exists on your display y
settings dialog box, the correct value is ‘60’ or ‘60 Hz’.
Otherwise, just click ‘OK’ and exit the dialog box.
Changing the Picture Options ¦
Advanced settings
MEnU
Om
→ Picture → Advanced settings →
EnTER
E
(available in standard / Movie mode)
Compared to previous models, new Samsung TVs have
more precise pictures.
In PC mode, you can only make changes to
✎
Dynamic
Contrast, gamma and White Balance.
Bla ■ck Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.
Dynamic Contrast (Off / low / Medium / high) ■:
Adjust the screen contrast.
shadow Detail ■: Increase the brightness of dark images.
Disabled under PC mode.
✎
g ■amma: Adjust the primary color intensity.
RgB Only Mode (Off / Red / green / Blue) ■: Displays
the Red, green and Blue color for making fine
adjustments to the hue and saturation.
Color space (Auto / native) ■: Adjust the range of colors
available to create the image.
White Balance ■: Adjust the color temperature for a more
natural picture.
R-Offset / g-Offset / B-Offset: Adjust each color's
(red, green, blue) darkness.
R-gain / g-gain / B-gain: Adjust each color's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default
settings.
Flesh Tone ■: Emphasize pink "flesh tone".
Edge Enhancement (Off / On) ■: Emphasize object
boundaries.
Picture Options
MEnU
Om
→ Picture → Picture Options →
EnTER
E
In PC mode, you can only make changes to the
✎
Color
Tone, size and Auto Protection Time.
Color Tone (Cool / normal / Warm1 / Warm2) ■
Warm1
✎
or Warm2 will be deactivated whe n the
picture mode is Dynamic.
Settings can be adjusted and stored for e ach
✎
external device connected to an in put on the TV.
size ■: Your cable box/satellite receiver
may have its own set of screen sizes as
well. However, we highly recommend
you use 16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide mode.
Zoom1: Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
4:3: Sets the picture to basic (4:3) mode.
Do not watch in 4:3 format for a long time. Traces
✎
of borders displayed on the left, rig ht and center
of the screen may cause image retention (scre en
burn) which are not covered by the warrant y.
screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are input.
nOTE
✎
After selecting
x
Zoom1, Zoom2 or Wide Fit:
1. Press the ► button to select Position.
2. Press the EnTER
E
button.
3. Press the ▲ or ▼ button to move the picture up
or down.
4. Press the EnTER
E
button.
5. Press the ► button to select Reset.
6. Press the EnTER
E
button to reset the picture
to its default position.
Advanced Settings
Black Tone : Off ►
Dynamic Contrast : Medium
Shadow Detail : 0
Gamma : 0
RGB Only Mode : Off
Color Space : Native
White Balance
▼
U Move E Enter R Return
Picture Options
Color Tone : Normal ►
Size : 16:9
Digital Noise Filter : Auto
MPEG Noise Filter : Auto
HDMI Black Level : Normal
Film Mode : Off
Auto Protection Time : 2 hours
U Move E Enter R Return
P
POWER
FAV . CH
CHLIST
MEDIA.P
P. MODE
S.MODE
P. SIZE
CC
MTS
INFO
SLEEP
BN68-02604B_Eng.indb 15 2010-09-01 �� 9:58:26