27
English
04 Advanced Features
how to set up automatically
To set up the wireless connection automatically, follow these
steps:
1. Follow Steps 1 through 6 in the “How to set up using
PBC (WPS)”. (P. 26)
2. Press the ▼ button to select Internet Protocol setup,
and then press the EnTER
E
button. Press the ▲ or
▼ button to select Auto, and then press the EnTER
E
button.
3. Press the ▲ button to go to select a network, and
then press the EnTER
E
button. The network function
searches for available wireless networks. When done, it
displays a list of the available networks.
4. In the list of networks, press the ▲ or ▼ button to select
a network, and then press the EnTER
E
button.
If the AP is set to Hidden (Invisible), you have
✎
to select Add network and enter the co rrect
network name (ssID) and sec urity Key to
establish the connection.
5. If the Security/PIN pop-up appears, go to Step 6. If the
Network Connecting Screen appears, go to Step 10.
6. Press the ▲ or ▼ button to select security or PIn. For
most home networks, you would select Security (for
security Key). The security Screen appears.
7. On the security screen, enter your network’s Pass
Phrase.
You should be able to find the Pass Phrase on
✎
one of the set up screens you used to set up your
router or modem.
8. To enter the Pass Phrase, follow these general
directions:
Press the number buttons on your remote to enter –
numbers.
Use the direction buttons on your remote to move –
from button to button on the security Key screen.
Press the Red button to change case or display –
symbols/characters.
To a enter letter or symbol, move to the letter or –
symbol, and then press the EnTER
E
button.
To delete the last letter or number you entered, –
press the Green button on your remote.
9. When done, press the Blue button on your remote. The
Network Connecting screen appears.
10. Wait until the connection confirmation message is
displayed, and then press the EnTER
E
button. The
network setup screen re-appears.
11. To test the connection, press the RETURn button to
select network Test, and then press the EnTER
E
button.
network setup (Ad-hoc)
You can connect to a mobile device without an access point
through the “Samsung Wireless LAN Adapter” by using a
peer to peer network.
how to connect to new Ad-hoc
1. Follow Steps 1 through 6 in the “How to set up using
PBC(WPS)”. (P. 26)
2. Choose select a network. A list of devices/networks
appears.
3. While in the device list, press the Blue button on the
remote.
The message
✎
"Ad-hoc is a direct WI-Fi
connection with cellphon e or PC. The existing
network system may have limited fu nctionality.
Do you want to change the network
connection?" is displayed.
4. Input the generated network name (ssID) and
security Key into the device you want to connect.
how to connect an existing Ad-hoc device
1. Follow Steps 1 through 6 in the “How to set up using
PBC(WPS)”. (P. 26)
2. Choose select a network. Then, the device list will be
displayed.
3. Select the device you want in the Device list.
4. If security key was applied, input the security key.
If network does not operate normall y, check
✎
the network name (ssID) and se curity Key
again. An incorrect securit y Key may cause a
malfunction.
A B C D E F G
H I J K L M N
O P Q R S T U
V W X Y Z
0~9
Security Key
0 entered
Number
Lower case
B
Delete
Space
C
Select a network
n Move E Enter R Return
BN68-02604B_Eng.indb 27 2010-09-01 �� 9:58:31