Chapter 1 Overview
Chapter 1 Overview 13
Indications in the display window (continued)
This shows how many clip shots can still be recorded.
Indication Index picture Cue point
CLIP pppppp 51 pictures or more 101 points or more
CLIP ppppp 41 to 50 pictures 81 to 100 points
CLIP pppp 31 to 40 pictures 61 to 80 points
CLIP ppp 21 to 30 pictures 41 to 60 points
CLIP pp 11 to 20 pictures 21 to 40 points
CLIP p1 to 10 pictures 1 to 20 points
CLIP p (blinking) a) 1 to 3 pictures 1 to 6 points
CLIP Cannot record
CLIP (blinking) a) Cannot record
a) When back space editing using ClipLink function is possible (when CONT
appears)
During recording or pause mode, this indication shows the remaining tape time as
shown below. It is not displayed when no cassette is loaded.
Indication Tape time remaining
TAPE ppppppp 30 minutes or more
TAPE pppppp 25 to 30 minutes
TAPE ppppp 20 to 25 minutes
TAPE pppp 15 to 20 minutes
TAPE ppp 10 to 15 minutes
TAPE pp 5 to 10 minutes
TAPE p2 to 5 minutes
TAPE p (blinking) 0 to 2 minutes
TAPE (blinking) End of tape
q Tape remaining indication
r Clip remaining indication
s Time value indication Depending on the DISPLAY switch setting, this shows a counter value, time code
value, or user bit value. Press the MENU button 3 to display the VTR menu.
Indication Description
2 WARNING indicator
This lights or blinks when an abnormality occurs.
For details, see “Warning System” on page 72.
3 MENU button
Press this button to display the VTR menu in the
display window 1.
For details about the VTR menu, see Chapter 6 “Menu”.
4 LIGHT switch
This switches the display window 1 light on and off.
5 BACK TALLY switch
Set this switch to ON to activate the TALLY indicator
6 function.
6 TALLY (back tally) indicator (red)
This indicator lights during recording. It will not light
if the BACK TALLY switch 5 is set to OFF. This
indicator also blinks to indicate warnings in the same
manner as the REC/TALLY indicator in the
viewfinder of the camera.
For details, see “Warning System” on page 72.