Chapter 2 Fitting and Connecting Related Equipment
Chapter 2 Fitting and Connecting Related Equipment 25
3Attach the cover upside down.
Make sure that the match mark
lines up with the PRO76P
DIGITAL indication.
PRO76P
DIGITAL
Match mark
Using the DXC-637/537/537A/327A/327B series camera
Replace the PRO 76-pin DIGITAL connector with the PRO 50-pin
connector. Press the left side of the PRO 76-pin DIGITAL connector until
the PRO 50-pin connector appears. Make sure that the match mark lines up
with the PRO50P indication.
Mounting on the camera
This section describes the procedure for mounting the DSR-1/1P on a
DXC-D30/D30P/D35/D35P. Use the same procedure for mounting on a
DXC-637 series camera. (Replace the PRO 76-pin DIGITAL connector
with the PRO 50-pin connector.)
When using the camcorder grip
When configuring a camcorder with the camera, a camcorder grip (not
supplied) can be attached instead of the camera grip.
For instructions on attaching the grip, see the operating instructions for the
camera.
1If necessary, replace the PRO
50-pin connector with the PRO
76-pin DIGITAL connector.
For details, see “Using the DXC-
D30/D30P/D35/D35P” (on
previous page).
PRO 76-pin DIGITAL connector
(Continued)