9
Description-Rear Panel
OPTICAL COAXIAL
DIGITAL AUDIO OUT 5.1CH SURROUND AUDIO OUT AUDIO OUT VIDEO OUT S-VIDEO OUT
V1
V2
COMPONENT VIDEO OUT
YPr
Pb
R FRONT L
R1
R2
L1
L2
CENTER
S/W
R SURROUND L
1
DIGITALAUDIO OUT JACK
• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital
receiver. Use to connect to an A/V Amplifier that contains a Dolby Digital decoder or
DTS decoder.
2
5.1CH SURROUND AUDIO OUTJACKS
• Connect to an amplifier with 5.1CH analog input jacks.
3
AUDIO OUTJACKS
• Connect to the Audio input jacks of your television, audio/video receiver, or VCR.
• Audio will be output via Front (R/L) of the analog audio out jacks except for
CASE1 (2CH).
4
VIDEO OUTJACKS
• Use a video cable to connect one of these jacks to the Video input on your television.
5
S-VIDEO OUTJACK
• Use the S-Video cable to connect this jack to the S-Video jack on your television for a
higher quality picture.
6
COMPONENTVIDEO OUT JACKS
•Use these jacks if you have a TV with Component Video in jack on your television for a
higher quality picture.
23456
1
Rear Panel Jacks
Connect headphones with a standard stereo plug to the headphone jack (M6).
• Before connecting, set headphone volume at minimum. Then adjust to a suitable volume.
To Connect Headphones (not included)
SETUP