Setting up the Progressive | Canceling the Progressive |
scan | scan |
If the TV supports Progressive Scan, press the P.SCAN button on the front of the DVD Recorder to enjoy.
1 With the unit in Stop mode, press the P.SCAN button on the front of the DVD Recorder.
The message “Press [Yes] to confirm Progressive scan mode. Otherwise press [No]” will appear. Press the œ √ buttons to select Yes, and then press the OK button.
Press [Yes] to confirm Progressive scan mode.
Otherwise press [No]
Yes No
2 The message “Please set your TV to Progressive input. To deactivate, press [STOP] key.” will appear. Press the OK button.
Please set your TV to Progressive input.
To deactivate, press [STOP] key.
OK
3 The message “Video Output Mode
Progressive Scan” will appear.
1 With the unit in Stop mode, press the P.SCAN button on the front of the DVD Recorder.
The message “Press [Yes] to confirm Interlace scan mode. Otherwise press [No]” will appear. Press the œ
√buttons to select Yes, and then press the OK button.
Press [Yes] to confirm Interlace scan mode.
Otherwise press [No]
Yes No
2 The message “Please set your TV to Interlace input. To deactivate, press [STOP] key.” will appear. Press the OK button.
Please set your TV to Interlace input,
To deactivate, press [STOP] key.
OK
3 The message “Video Output Mode Interlace Scan” will appear.
Video Output Mode
Interlace Scan
Setup ystemS
NOTE
Video Output Mode
Progressive Scan
■ Progressive setting is only available when the Video Out is set to Component.
■If the P.SCAN button on the DVD recorder’s front panel is pressed during playback, the message “This function is only available in stop mode” appears on the screen.
■Progressive setting is only available when the DVD recorder is in stop mode.
| ■ | Do not press the P.SCAN button if you |
|
| are using a TV that does not support |
NOTE | ||
|
| Progressive mode. Nothing will be |
|
| |
|
| displayed on the screen if pressed. |
■If you press the P.SCAN button by mistake when your TV does not support Progressive mode, you need to release the Progressive mode. To release the Progressive mode, press the P.SCAN button on the front panel 3 times.
The screen will recover after the PSO LED on the front panel display turns off.
English