English -
45
Recording
5
Press the REC button.
To pause recording
Press the button to pause a recording in progress.
●Press the button again to resume
recording.
●You can switch channels by pressing the PROG
(/)buttons while recording pauses.
To stop recording
Press the STOP ( ) button to stop or finish a
recording in progress.
●When using DVD-RAM/DVD-RW/DVD-R discs, the
message ‘Updating the information of disc.
Please wait for a moment’ is displayed.
Recording from external equipment you are watching
Check that the disc has enough available space for the
recording. Adjust the recording mode.
1
Press the OPEN/CLOSE button, place a
recordable disc on the disc tray.
2
Press the OPEN/CLOSE button to close
the disc tray.
Wait until “LOAD” disappears from the front panel
display.
If an unused DVD-RAM disc is used, whether to
format or not will be asked first. (See page 42)
If an unused DVD-RW disc is used, whether to
initialize or not will be asked first. (See page 42)
3
Press the INPUT button to select the input
source according to the connection you
made.
The front panel display changes in the following
sequence:
➞ PR Number ➞ AV1 ➞ AV2 ➞ AV3 ➞ DV
If you connect a digital camcorder, press the
INPUT button to select DV. (See page 46)
4
Press the REC MODE button repeatedly,
(or press the REC MODE button, then
press the …† button) to select the
recording speed(quality).
➞ SP ➞ LP ➞ EP ➞ XP
Before you start
Record Mode
SP(02:12)
■
You can not change the recording mode
and input source while recording or
Pause.
■
Recording will stop automatically if
there is no free space left for recording.
■
Up to 99 titles can be recorded onto a
disc.
■
Recording will stop automatically if a
copy protected image is selected.
■
DVD-RAM/DVD-RW discs must be
formatted before starting to record.
Most new discs are sold unformatted.
■
Do not use DVD-R authoring discs with
this unit.
NOTE
1-00687A-R120-UK_43~52 3/10/05 5:23 PM Page 45