Additional Information
86
- English
Sound
Checkpoint 1
Checkpoint 2
Checkpoint 3
Checkpoint 4
No sound.
Are you watching a programme in slow
or skip mode?
If you are playing a programme at a
speed other than normal or Fast 1
speed,
sound will not be heard.
Check the connections and settings.
(See pages 19~20, 30~31)
Check whether the disc is damaged.
Clean the disc, if necessary.
Check whether the disc is inserted
correctly with the label facing up.
Checkpoint 1
No audio output.
Check whether you have selected the
correct digital output options in the
Audio Output Options menu.
(See page 30.)
Re-check the recording time and the
end time settings again.
Recording will be cancelled if the power
is interrupted due to a power failure or
another similar reason while recording.
Checkpoint 1
Checkpoint 2
Timer recording does not work properly.
Timer Recording
Check there is enough space in the
disc for recording.
Check whether the current disc is
recordable or not.
Make sure to check before the start
time of recording.
Checkpoint 1
Checkpoint 2
Timer lamp flickers.
If snow noise appears on the screen, it
means that TV does not support HDCP
(High-bandwidth Digital Content
Protection).
Checkpoint 1
Abnormal HDMI output screen.
HDMI
Check the Video output is HDMI
enabled.
Check the connection between the TV
and the HDMI jack of the DVD
Recorder.
See if your TV supports this
576p/720p/1080i DVD Recorder.
Checkpoint 1
Checkpoint 2
Checkpoint 3
No HDMI output.
Check your TV system setup correctly.
Screen Jitter may occur when the
frame rate is converted from 50Hz to
60Hz for 720p/1080i HDMI (High
Definition Multimedia Interface) Output.
Please refer to the user's manual of
your TV.
Checkpoint 1
Checkpoint 2
Checkpoint 3
HDMI output Jitter
01094A-R135-XSS-ENG_84~88 3/28/06 4:55 PM Page 86