Samsung DVD-R4000

DVD-R4000

Playing back

Playing discs

[RAM] [DVD-R] [DVD-V] [VCD] [CD] [MP3]

1Press [Í, DVD POWER] to turn the

unit on.

2Press [< OPEN/CLOSE] to open the

tray and insert a disc (➜ page 15).

≥Press the button again to close the tray.

≥If cartridge protection is activated (➜page11), play begins

automatically when you close the tray. [RAM]

≥You cannot play continuously from one side of a double-

sided disc to the other. Eject the disc and turn it over.

3Press [1] (PLAY).

The unit takes some time to read the disc

before play starts. (When a menu screen

appears on the television ➜ next page).

≥If the resume function (➜below, to stop play) is not active,

playback will begin from the most recently recorded pro-

gram. To play from the beginning of a disc, select “PLAY

FROM TOP” in the FUNCTIONS window (➜page 23).

To stop play

Press [∫].

≥When “PLAY” flashes on the display, resume func-

tion is active. Press [1] (PLAY) to start play from

where you stopped it.

To cancel, press [∫] until “PLAY” goes out. (The

position is also cleared when you turn the unit off

or open the disc tray.)

≥The screen saver may appear when you

stop play. Press [∫] again and you can

use this unit’s tuner to watch television.

To pause play

Press [;]. (Press again to restart play.)

Auto power-off

The unit switches to standby after about 6 hours in the stop mode.

You can turn this feature off or change the time to 2 hours

(➜page 46, Set Up—Off Timer).

[Note]

≥If a disc is loaded, the unit will come on and play will start when

you press [1] (PLAY).

≥When you play a disc with an audio-only track, the video from the

previous disc may continue to be shown on the television.

≥Actual sound levels for DVD-Video are lower compared to televi-

sion broadcast or playback of other discs. To avoid a sudden

increase in volume level when switching from DVD-Video, reduce

the volume setting before playing other sources or switching to

television broadcast.

Disc tray

Numbered

buttons

ERASE