Shooting options

44

Shooting in the dark

•Flash options are not available if you set burst options or select
Self-Shot or Blink Detection.
•Make sure that your subjects are within the recommended distance
from the flash. (p. 102)
•If light from the flash is relected or there is a large amount of dust in
the air, tiny spots may appear in your photo.
Adjusting the ISO speed
The ISO speed is the measure of a film’s sensitivity to light as
defined by the International Organization for Standardization (ISO).
The higher ISO speed you select, the more sensitive to light your
camera becomes. With a higher ISO speed, you can get a better
photo without using the flash.
1
In Shooting mode, press [ ].
2

Select Shooting → ISO → an option.

• Select to use an appropriate ISO speed based on the

brightness of the subject and lighting.

•The higher ISO speed you select, the more image noise you may get.
•When you select Motion Capture, the camera sets the ISO speed
to Auto.
Option Description
Red-eye Fix*:
• The flash fires twice when the subject or background
is dark. The subject should not move until the flash
fires a second time.
• The camera corrects red-eyes through its advanced
software analysis.
Slow Sync:
• The flash fires and the shutter stays open longer.
• This option is recommended when you want to
capture ambient light to reveal more details in the
background.
• Use a tripod to prevent your photos from blurring.
• The camera will display the shake warning ( ) when
you are shooting in low light.
Fill in:
• The flash always fires.
• The camera adjusts light intensity automatically.
Red-eye*:
• The flash fires when the subject or background is
dark.
• The camera reduces red-eyes.
Auto: The flash fires automatically when the subject or
background is dark.
The options may differ depending on the shooting mode.