White balance

Using the Custom White Balance

White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance set- ting for a given shooting environment by setting up the custom white balance.

1.Select the CUSTOM ( Å) menu of

the White Balance and place a sheet of white paper in front of the camera so that the LCD monitor shows only white.

2. MENU/OK button : selects previous

White

 

paper

 

 

custom white balance.

 

 

 

Shutter button

: saves new custom white balance.

-The custom white balance value will be applied, starting with the next picture you take.

-The user configured white balance will be remain effective until it is overwritten.

Exposure compensation

This camera automatically adjusts the exposure according to the ambient lighting conditions.

You can also select the exposure value by using the Fn button.Compensating Exposure

1.

Press the Fn button, and then use the UP

 

 

and DOWN buttons to select the exposure

 

 

compensation icon ( Â).

 

2.

Use the LEFT and RIGHT buttons to set the

 

 

desired exposure compensation factor.

EV

3.

Press the OK or Fn button.

 

 

The value you set will be saved and the

 

 

Exposure Compensation setup mode will be closed. If you change

 

the exposure value, the exposure indicator ( Â) will be displayed

 

on the bottom of the LCD monitor.

 

ÄA negative exposure compensation value reduces the exposure. Note that a positive exposure compensation value increases the exposure and the LCD monitor will appear white or you may not get good pictures.

RECORDING 02

RECORDING_ 37